SHERP

Effect of Constitutive Laws on Plane Strain Ideal Flow Design: an Analytical Example

Cited 0 time in webofscience Cited 0 time in scopus
Authors
Alexandrov, S.; Lee, W.; Chung, K.; Kang, T. J.
Issue Date
2004-11-19
Publisher
Springer Verlag
Citation
Acta Mech. 173 :127-137
Abstract
The major objective of this paper is to clarify the effect of constitutive laws on bulk forming design based on the ideal flow theory. The latter theory is in general applicable for perfectly/plastic materials. However, its kinematics equations constitute a closed-form system, which are valid for any incompressible materials, therefore enabling us to extend design solutions based on the perfectly/plastic constitutive law to more realistic laws with rate sensitive hardening behavior. In the present paper, several constitutive laws commonly accepted for the modeling of cold and hot metal forming processes are considered and the effect of these laws on one particular plane strain design is demonstrated. The closed form solution obtained describes a nontrivial nonsteady ideal process. The design solutions based on the ideal flow theory are not unique. To achieve the uniqueness, the criterion that the plastic work required to deform the initial shape of a given class of shapes into a prescribed final shape attains its minimum is adopted. Comparison with a non-ideal process is also made.
ISSN
0001-5970
Language
English
URI
http://hdl.handle.net/10371/18925
DOI
https://doi.org/10.1007/s00707-007-0487-z
Files in This Item:
There are no files associated with this item.
Appears in Collections:
College of Engineering/Engineering Practice School (공과대학/대학원)Dept. of Material Science and Engineering (재료공학부) Journal Papers (저널논문_재료공학부)
  • mendeley

Items in S-Space are protected by copyright, with all rights reserved, unless otherwise indicated.

Browse