SHERP

Weldline morphology of injection molded modified poly(phenylene-oxide)/polyamide-6 blends

Cited 0 time in webofscience Cited 10 time in scopus
Authors
Son, Younggon; Ahn, Kyung Hyun; Char, Kookheon
Issue Date
2004-04-08
Publisher
John Wiley & Sons;
The Royal Entomological Society
Citation
Polym. Eng. Sci. 41. 554 (2004)
Abstract
The weldline morphology of modified-poly(phenylene-oxide)/polyamide-6 blends has been investigated. A distinct contacting layer consisting of fine spherical particles was observed from the V-notch at the surface to the center of the molded part for the low viscosity ratio blend. In contrast, such small particles were not found and a slight deformation was observed near the part's surface for the high viscosity ratio blend. The weldline morphology was found to be dominated by the deformation, the breakup, and the relaxation of the dispersed modified-poly(phenyleneoxide) phase. The effect of injection conditions on the weldline morphology has also been investigated. The morphology of the meldline was quite complicated. Distorted multi-layered structures were observed. It was found that those structures arise from the subsequent flow after merging of the two flow fronts. Weldlines and meldlines have been studied separately, and their formation mechanisms were found to be basically similar.
ISSN
0032-3888 (print)
1548-2634 (online)
Language
English
URI
http://hdl.handle.net/10371/5874
DOI
https://doi.org/10.1002/pen.10752
Files in This Item:
There are no files associated with this item.
Appears in Collections:
College of Engineering/Engineering Practice School (공과대학/대학원)Dept. of Chemical and Biological Engineering (화학생물공학부)Journal Papers (저널논문_화학생물공학부)
  • mendeley

Items in S-Space are protected by copyright, with all rights reserved, unless otherwise indicated.

Browse