Browse

Separation Motion of Strap-On Boosters with Base Flow and Turbulence Effects

DC Field Value Language
dc.contributor.authorKo, Soon-Heum-
dc.contributor.authorKim, Chongam-
dc.date.accessioned2009-08-11T03:55:05Z-
dc.date.available2009-08-11T03:55:05Z-
dc.date.issued2008-05-
dc.identifier.citationJournal of Spacecraft and Rockets Vol.45 No.3, pp. 485-494en
dc.identifier.issn0022-4650-
dc.identifier.urihttp://hdl.handle.net/10371/6914-
dc.description.abstractA numerical investigation is conducted around a multistage launch vehicle to examine the influence of the base region and turbulence. A Reynolds-averaged Navier–Stokes flow solver coupled with rigid body dynamics, because of resultant aerodynamic forces and gravity, is developed to simulate the detachment motion of strap-on boosters. An overset mesh technique is adopted to achieve maximal efficiency in simulating the relative motion of launch vehicles, and various turbulence models are implemented to accurately predict aerodynamic forces in high Reynolds number flows. The flow solver is validated by comparing the computed pressure coefficients of the Titan-IV launch vehicle with the experimental data. In addition, some preliminary studies are conducted to examine the influence of the base flow and turbulence effect in the accurate simulation of detachment motion. Finally, the separation behavior of the KSR-III, a three-stage sounding rocket developed in Korea, is numerically investigated. It is observed that the afterbody flowfield strongly affects the separation motion of strap-on boosters. The negative pitching moment of a strap-on at the initial stage of a detachment motion is gradually recovered and the final result is a safe separation, whereas forebody-only analysis yields a collision scenario between the core rocket and the booster. Only a slight difference in vehicle trajectory is observed from the comparison between inviscid and turbulent analyses. Change of the separation trajectory due to viscous effects is just a few percentage points and, therefore, inviscid analysis seems to be sufficient for the simulation of separation motion if the study focuses on the movement of strap-ons.en
dc.description.sponsorshipThe authors would like to acknowledge the computing support of
the Korea Institute of Science and Technology Information (KISTI)
under “The Sixth Strategic Supercomputing Support Program,” with
Kum Won Cho as the technical supporter. Also, the authors would
like to acknowledge the financial support of the Bain Korea-21
program for the School of Mechanical and Aerospace Engineering
Research at Seoul National University and the Korea National e-
Science project.
en
dc.language.isoenen
dc.publisherAmerican Institute of Aeronautics and Astronauticsen
dc.titleSeparation Motion of Strap-On Boosters with Base Flow and Turbulence Effectsen
dc.typeArticleen
dc.contributor.AlternativeAuthor고순흠-
dc.contributor.AlternativeAuthor김종암-
dc.identifier.doi10.2514/1.33706-
dc.citation.journaltitleJournal of Spacecraft and Rockets-
Appears in Collections:
College of Engineering/Engineering Practice School (공과대학/대학원)Dept. of Mechanical Aerospace Engineering (기계항공공학부)Journal Papers (저널논문_기계항공공학부)
Files in This Item:
There are no files associated with this item.
  • mendeley

Items in S-Space are protected by copyright, with all rights reserved, unless otherwise indicated.

Browse