Browse

Stiffness requirements for transverse stiffness of CFT compression panels

DC Field Value Language
dc.contributor.authorLee, Kyoung Chanen
dc.contributor.authorKang, Junsuk-
dc.contributor.authorYoo, Chai Hong-
dc.creator강준석-
dc.date.accessioned2017-04-25T07:46:50Z-
dc.date.available2017-12-28T15:47:56Z-
dc.date.issued2013-06-
dc.identifier.citationInternational Journal of Steel Structures, Vol.13 No.2, pp. 265-274-
dc.identifier.issn1598-2351-
dc.identifier.urihttps://hdl.handle.net/10371/117512-
dc.description.abstractThis paper presents a more rational calculation of the minimum stiffness required for transverse stiffeners of stiffened concrete filled tube (CFT) compression panels. As longitudinal stiffeners are essentially compression members, transverse stiffeners are required to control the effective length. Both the longitudinal stiffener and transverse stiffener subdivide the compression panel in a grid pattern so the relatively thin plate can carry the induced compressive load in the most efficient manner. However, the provisions for the required rigidity of transverse stiffeners in the literature are inconsistent in general and in particular; do not exist in the case of the concrete filled compression panels. Here, the parameters that govern the behavior of the transverse stiffeners are identified theoretically using the column buckling approximation. In order to calibrate and quantify the analytical equations developed, incremental nonlinear analyses were performed on a large number of finite-element models. The numerically collected data were then used to validate the equations developed.-
dc.language.isoen-
dc.publisherKOREAN SOC STEEL CONSTRUCTION-KSSCen
dc.subjectStiffness requirements for transverse stiffness of CFT compression panelsen
dc.subject공학en
dc.subjectbuckling-
dc.subjectCFT-
dc.subjectcompression panel-
dc.subjectfinite element analysis-
dc.subjectsteel plates-
dc.subjectstiffener-
dc.titleStiffness requirements for transverse stiffness of CFT compression panelsen
dc.typeArticle-
dc.contributor.AlternativeAuthor이경찬-
dc.contributor.AlternativeAuthor강준석-
dc.contributor.AlternativeAuthor유채홍-
dc.identifier.doi10.1007/s13296-013-2006-5-
dc.description.srndOAIID:RECH_ACHV_DSTSH_NO:T200700105-
dc.description.srndRECH_ACHV_FG:RR00200001-
dc.description.srndADJUST_YN:-
dc.description.srndEMP_ID:A080442-
dc.description.srndCITE_RATE:.471-
dc.description.srndDEPT_NM:조경·지역시스템공학부-
dc.description.srndSCOPUS_YN:Y-
dc.description.srndCONFIRM:Y-
dc.identifier.rimsid15715-
dc.identifier.srndT200700105-
dc.type.rimsART-
Appears in Collections:
College of Agriculture and Life Sciences (농업생명과학대학)Dept. of Landscape Architecture and Rural System Engineering (생태조경·지역시스템공학부)Journal Papers (저널논문_생태조경·지역시스템공학부)
Files in This Item:
There are no files associated with this item.
  • mendeley

Items in S-Space are protected by copyright, with all rights reserved, unless otherwise indicated.

Browse