Publications
Detailed Information
FET Gas Sensor Platform Having a Horizontal Floating Gate : 수평형 Floating Gate를 갖는 FET 가스센서 플랫폼
DC Field | Value | Language |
---|---|---|
dc.contributor.advisor | 이종호 | - |
dc.contributor.author | 김창희 | - |
dc.date.accessioned | 2017-07-13T07:10:37Z | - |
dc.date.available | 2017-07-13T07:10:37Z | - |
dc.date.issued | 2015-08 | - |
dc.identifier.other | 000000056938 | - |
dc.identifier.uri | https://hdl.handle.net/10371/119108 | - |
dc.description | 학위논문 (박사)-- 서울대학교 대학원 : 전기·컴퓨터공학부, 2015. 8. 이종호. | - |
dc.description.abstract | Today, there are numerous kinds of gases which are becoming widely used in the various industry fields. However, the harmful gases which a disease of the respiratory system are generated by industrial activity. Therefore, the demand for a gas sensor which can detect the noxious gases is expected to grow. Especially, there will be a growing interest in portable, low-cost, high reliability and low-power gas which can be applied to smart device in the future. Many kinds of gas sensors have been developed by many researcher until now: electrochemical, electrical, mass sensitive, magnetic, optical and thermometric type gas sensors. One gas sensor type of interest is that based on FET (Field Effect Transistor) has been considered as advanced gas sensor which can implant in various smart devices. However, there are many disadvantages in conventional FET type gas sensors.
In this thesis, we propose a gas sensor platform having a horizontal floating-gate (FG) to solve the problem shown in conventional FET gas sensor. We first introduce structure and fabrication process sequence of the gas sensor that we proposed. The gas sensor is based on MOSFET (Metal Oxide Semiconductor Field Effect Transistor) and have a horizontal FG and the sensing layer covers partly the control-gate (CG) formed horizontally and the passivation layer formed on the FG in the center. The gas sensor reads out work-function (WF) change in the sensing layer formed between FG and CG (control gate), when the device is exposed to a target gas. The sensing layers in our work are semi-metal or semiconductor. Next, we analysis gas sensing characteristics of the fabricated gas sensor by using various sensing layers and target gases, respectively. We measure transfer and transient curves of the device in target gases. From the measured data, we explain operating principle and show gas sensitivity, selectivity, response and recovery characteristic and Langmuir relationship of the gas sensor. We also show the various methods that various gas sensing layers are formed on the gas sensor and verify gas sensing characteristics of the device in which SnOx (Tin Oxide), ZnO (Zinc oxide) and CNT (Carbon Nanotube) are used as a gas sensing materials by using sputtering, ALD (Atomic Layer Deposition) and ink-jet printing method. Then, we show sensor calibration of the gas sensor by CG bias. Finally, we fabricate FET gas sensor based on wide band gap material (Gallium nitride) which can operate at high temperature (T > 300 °C) and conform gas sensing characteristics of the gas sensor. We think that the proposed gas sensor platform can be applied to various FET type device (ex TFT: Thin Film Transistor, TFET: Tunneling Field Effect Transistor) useful and a key component in an electronic nose system. | - |
dc.description.tableofcontents | Contents
Abstract 1 Contents 3 Chapter1 Introduction 6 1.1 Gas sensor 6 1.2 FET gas sensor 13 1.3 Work function change of sensing materials 18 Chapter2 MOSFET gas sensor having a horizontal floating gate 22 2.1 Introduction 22 2.2 Device structure and fabrication 23 2.3 Electrical characteristic 30 Chapter3 Gas sensing characteristic 32 3.1 Gas sensor measurement system 32 3.2 Results and discussion 36 3.3 Zinc oxide sensing layer with ALD method 52 3.4 Carbon nanotube sensing layer with ink-jet printing method 63 3.5 Sensor calibration 74 3.6 Conclusion 77 Chapter4 AlGaN/GaN MISFET Gas Sensor Having a Horizontal Floating Gate 78 4.1 Introduction 78 4.2 Device structure and fabrication 79 4.3 Electrical and gas sensing characteristics 82 4.4 Conclusion 85 Conclusion 86 Bibliography 87 Abstract in Korean 93 | - |
dc.format | application/pdf | - |
dc.format.extent | 3179886 bytes | - |
dc.format.medium | application/pdf | - |
dc.language.iso | en | - |
dc.publisher | 서울대학교 대학원 | - |
dc.subject | FET 가스센서 | - |
dc.subject.ddc | 621 | - |
dc.title | FET Gas Sensor Platform Having a Horizontal Floating Gate | - |
dc.title.alternative | 수평형 Floating Gate를 갖는 FET 가스센서 플랫폼 | - |
dc.type | Thesis | - |
dc.contributor.AlternativeAuthor | Chang-Hee Kim | - |
dc.description.degree | Doctor | - |
dc.citation.pages | 94 | - |
dc.contributor.affiliation | 공과대학 전기·컴퓨터공학부 | - |
dc.date.awarded | 2015-08 | - |
- Appears in Collections:
- Files in This Item:
Item View & Download Count
Items in S-Space are protected by copyright, with all rights reserved, unless otherwise indicated.