Browse

Controlled Prelithiation of Silicon Monoxide for High Performance Lithium-Ion Rechargeable Full Cells

DC Field Value Language
dc.contributor.authorKim, Hye Jin-
dc.contributor.authorChoi, Sunghun-
dc.contributor.authorLee, Seung Jong-
dc.contributor.authorSeo, Myung Won-
dc.contributor.authorLee, Jae Goo-
dc.contributor.authorDeniz, Erhan-
dc.contributor.authorLee, Yong Ju-
dc.contributor.authorKim, Eun Kyung-
dc.contributor.authorChoi, Jang Wook-
dc.date.accessioned2020-03-16T10:56:56Z-
dc.date.available2020-03-16T10:56:56Z-
dc.date.issued2016-01-
dc.identifier.citationNano Letters, Vol.16 No.1, pp.282-288-
dc.identifier.issn1530-6984-
dc.identifier.other38615-
dc.identifier.urihttps://hdl.handle.net/10371/164548-
dc.description.abstractDespite the recent considerable progress, the reversibility and cycle life of silicon anodes in lithium-ion batteries are yet to be improved further to meet the commercial standards. The current major industry, instead, adopts silicon monoxide (SiOx, x approximate to 11), as this phase can accommodate the volume change of embedded Si nanodomains via the silicon oxide matrix. However, the poor Coulombic efficiencies (CEs) in the early period of cycling limit the content of SiOx, usually below 10 wt % in a composite electrode with graphite. Here, we introduce a scalable but delicate prelithiation scheme based on electrical shorting with lithium metal foil. The accurate shorting time and voltage monitoring allow a fine-tuning on the degree of prelithiation without lithium plating, to a level that the CEs in the first three cycles reach 94.9%, 95.7%, and 97.2%. The excellent reversibility enables robust full-cell operations in pairing with an emerging nickel-rich layered cathode, Li[Ni0.8Co0.15Al0.05] O-2, even at a commercial level of initial areal capacity of 2.4 mAh cm(-2), leading to a full cell energy density 1.5-times as high as that of graphite-LiCoO2 counterpart in terms of the active material weight.-
dc.subjectCoulombic efficiency-
dc.subjectcycle life-
dc.subjectfull cell-
dc.subjectprelithiation-
dc.subjectsilicon monoxide-
dc.titleControlled Prelithiation of Silicon Monoxide for High Performance Lithium-Ion Rechargeable Full Cells-
dc.typeArticle-
dc.contributor.AlternativeAuthor최장욱-
dc.identifier.doi10.1021/acs.nanolett.5b03776-
dc.citation.journaltitleNano Letters-
dc.identifier.scopusid2-s2.0-84957568957-
dc.citation.endpage288-
dc.citation.number1-
dc.citation.startpage282-
dc.citation.volume16-
dc.identifier.rimsid38615-
dc.identifier.sci000368322700045-
dc.description.isOpenAccessN-
dc.contributor.affiliatedAuthorChoi, Jang Wook-
Appears in Collections:
College of Engineering/Engineering Practice School (공과대학/대학원)Dept. of Chemical and Biological Engineering (화학생물공학부)Journal Papers (저널논문_화학생물공학부)
Files in This Item:
There are no files associated with this item.
  • mendeley

Items in S-Space are protected by copyright, with all rights reserved, unless otherwise indicated.

Browse