Browse

Radiographic Evaluation of Marginal Bone Level Around Implants with Different Neck Designs After 1 Year

DC Field Value Language
dc.contributor.authorShin, Young-Kyu-
dc.contributor.authorHan, Chong-Hyun-
dc.contributor.authorHeo, Seong-Joo-
dc.contributor.authorKim, Sunjai-
dc.contributor.authorChun, Heoung-Jae-
dc.date.accessioned2011-10-13-
dc.date.available2011-10-13-
dc.date.issued2006-
dc.identifier.citationInt J Oral Maxillofac Implants 2006;21:789–795en
dc.identifier.issn0882-2786-
dc.identifier.urihttps://hdl.handle.net/10371/74074-
dc.description.abstractPurpose: To evaluate the influence of macro- and microstructure of the implant surface at the marginal bone level after functional loading. Materials and Methods: Sixty-eight patients were randomly assigned to 1 of 3 groups. The first group received 35 implants with a machined neck (Ankylos); the second group, 34 implants with a rough-surfaced neck (Stage 1); and the third, 38 implants with a rough-surfaced neck with microthreads (One plant). Clinical and radiographic examinations were conducted at baseline (implant loading) and 3, 6, and 12 months postloading. Two-way repeated analysis of variance (ANOVA) was used to test the significance of marginal bone change of each tested group at baseline, 3, 6, and 12 month follow-ups and 1-way ANOVA was also used to compare the bone loss of each time interval within the same implant group (P < .05). Results: At 12 months, significant differences were noted in the amount of alveolar bone loss recorded for the 3 groups (P < .05). The group with the rough-surfaced microthreaded neck had a mean crestal bone loss of 0.18 ± 0.16 mm; the group with the rough-surfaced neck, 0.76 ± 0.21 mm; and the group with the machined neck, 1.32 ± 0.27 mm. In the rough-surfaced group and the rough-surfaced microthreaded group, no statistically significant changes were observed after 3 months, whereas the machined-surface group showed significant bone loss for every interval (P < .05). Discussion: To minimize marginal bone loss, in addition to the use of a rough surface at the marginal bone level, a macroscopic modification such as the addition of microthreads could be recommended. A rough surface and microthreads at the implant neck not only reduce crestal bone loss but also help with early biomechanical adaptation against loading in comparison to the machined neck design. Conclusion: A rough surface with microthreads at the implant neck was the most effective design to maintain the marginal bone level against functional loading.en
dc.language.isoenen
dc.publisherQuintessence Publishingen
dc.subjectmachined necken
dc.subjectmarginal bone levelen
dc.subjectmicrothreadsen
dc.subjectrough surfaceen
dc.titleRadiographic Evaluation of Marginal Bone Level Around Implants with Different Neck Designs After 1 Yearen
dc.typeArticleen
dc.contributor.AlternativeAuthor신영규-
dc.contributor.AlternativeAuthor한종현-
dc.contributor.AlternativeAuthor허성주-
dc.contributor.AlternativeAuthor김선재-
dc.contributor.AlternativeAuthor전흥재-
Appears in Collections:
College of Dentistry/School of Dentistry (치과대학/치의학대학원)Dept. of Dentistry (치의학과)Journal Papers (저널논문_치의학과)
Files in This Item:
There are no files associated with this item.
  • mendeley

Items in S-Space are protected by copyright, with all rights reserved, unless otherwise indicated.

Browse