Browse

Three-dimensional profile curve machining on three-axis machines

Cited 1 time in Web of Science Cited 1 time in Scopus
Authors
Chang, M.; Park, S. C.; Chung, Y. C.
Issue Date
2009
Publisher
TAYLOR & FRANCIS LTD
Citation
INTERNATIONAL JOURNAL OF PRODUCTION RESEARCH; Vol.47 10; 2587-2599
Keywords
profile curve machiningthree-axis machiningdie machiningtool path generation
Abstract
Presented in this paper is a tool path generation procedure for three-dimensional profile curve machining on three-axis machines, which is essential for making dies of automotive press panels. While sculptured surface machining has received a significant amount of attention, there has been very little work on profile curve machining. The most distinctive feature of profile curve machining is that the machine operator determines the exact cutter radius at the stage of numerical control (NC) machining. For this reason, profile curve machining usually makes use of the cutter radius compensation functionality of an NC controller. In this paper, four technological requirements for the profile curve machining are identified: (1) maintaining a constant machining width; (2) avoiding controller alarms; (3) avoiding unbalanced cutter wear; and (4) retaining down-milling. To satisfy these requirements, a tool path generation procedure is proposed, implemented and tested.
ISSN
0020-7543
Language
English
URI
https://hdl.handle.net/10371/75365
DOI
https://doi.org/10.1080/00207540701675858
Files in This Item:
There are no files associated with this item.
Appears in Collections:
College of Engineering/Engineering Practice School (공과대학/대학원)Dept. of Industrial Engineering (산업공학과)Journal Papers (저널논문_산업공학과)
  • mendeley

Items in S-Space are protected by copyright, with all rights reserved, unless otherwise indicated.

Browse