Publications
Detailed Information
Multiscale, multilevel architectures and polymeric stencils by partial curing and dewetting method : 부분경화와 비젖음 방법을 통한 다차원, 다층 구조물과 고분자 스텐실
| DC Field | Value | Language |
|---|---|---|
| dc.contributor.advisor | 서갑양 | - |
| dc.contributor.author | Hyesung Cho | - |
| dc.date.accessioned | 2017-07-13T06:08:24Z | - |
| dc.date.available | 2017-07-13T06:08:24Z | - |
| dc.date.issued | 2012-08 | - |
| dc.identifier.other | 000000003889 | - |
| dc.identifier.uri | https://hdl.handle.net/10371/118299 | - |
| dc.description | 학위논문 (박사)-- 서울대학교 대학원 : 기계항공공학부, 2012. 8. 서갑양. | - |
| dc.description.abstract | 이 학위논문에서는, 다양한 크기의 구멍을 갖는 부분 경화된 고분자 박막이 자외선 경화재료의 부분 경화를 통한 자발적인 디웨팅 과정을 통해 제시되었다. 이 박막들을 순차적으로 적층하고 붙인 후에 레플리카 몰딩공정을 진행하게 되면, 4층 이상의 다차원, 다층 고분자 구조물을 얻을 수 있다. 또한, 이 계층구조물을 몰드로 사용하여 디웨팅 공정을 진행하게 되면, 미세한 구멍을 갖는 프리스탠딩한 고분자 박막을 마이크로미터 크기의 지지구조물이 함께 부착된 형태로 견고하게 간단히 얻을 수 있다. | - |
| dc.description.abstract | In this thesis, partially cured membranes with various pore sizes (8-500 μm) are presented by spontaneous dewetting of UV-curable resin under the oxygen-inhibition effect. By monolithic multi-stacking of each membrane, multiscale, multilevel structures of up to four levels can be easily obtained after replica molding process. In addition, monolithically integrated free-standing stencils (5 μm-150 nm) firmly supported on a mesh-like backbone are formed by dewetting-assisted molding from the hierarchical architecture. | - |
| dc.description.tableofcontents | Abstract ∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙
i List of figures ∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙ viii Nomenclature ∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙ xiii Chapter 1. Introduction ∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙1 Chapter 2. Fabrication of microscale pore arrays in a polymeric membrane by partial curing and dewetting of UV-curable resin 2-1. Introduction ∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙8 2-2. Experimental ∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙11 2-3. Results and Discussion ∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙15 2-3-1. Theoretical analysis of partial curing phenomenon of UV-curable PUA resin ∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙15 2-3-2. Fabrication of partially cured polymeric membranes with ordered micropores from controlled oxygen-inhibition effects ∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙17 2-3-3. Spontaneous dewetting of uncured resin and subsequent wetting transition on a flat PDMS mold ∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙20 2-3-4. Residual-layer-free surface of PUA resin on a PDMS micropillar array ∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙23 2-3-5. Partially cured polymeric membranes with ordered micropore arrays ∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙25 2-4. Summary ∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙28 Chapter 3. Multistacking approaches with partially cured polymeric membranes for simple fabrication of multiscale, multilevel architectures 3-1. Introduction ∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙30 3-2. Experimental ∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙35 3-3. Results and Discussion ∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙37 3-3-1. Multistacking procedure for multiscale, multilevel polymeric structures ∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙37 3-3-2. Characterization of controlled oxygen-inhibition effect of PUA by FT-IR and FIB studies ∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙42 3-3-3. Multiscale, multilevel polymeric architecture with various materials ∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙46 3-4. Summary ∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙53 Chapter 4. Bio-inspired multidiemsional pore arrays in a flexible and free-standing polymeric membrane 4-1. Introduction ∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙55 4-2. Experimental ∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙59 4-3. Results and Discussion ∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙61 4-3-1. The dewetting of UV-curable resins (PUA/PFPE) on a hierarchical structure ∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙61 4-3-2. Microscale dewetting characterization by SIMS ∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙62 4-3-3. Nanoscale dewetting characterization by FMM ∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙65 4-3-4. Bio-inspired polymeric membranes with multidimensional pore arrays ∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙67 4-4. Summary ∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙72 References ∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙ 74 국문초록 ∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙ 81 | - |
| dc.format | application/pdf | - |
| dc.format.extent | 2311735 bytes | - |
| dc.format.medium | application/pdf | - |
| dc.language.iso | en | - |
| dc.publisher | 서울대학교 | - |
| dc.subject | Multiscale structures | - |
| dc.subject | Partial curing and dewetting of UV-curable resin | - |
| dc.subject | Multidimensional pores | - |
| dc.subject | Multistacking process | - |
| dc.subject | Flexible and free-standing polymeric membrane | - |
| dc.subject.ddc | 621 | - |
| dc.title | Multiscale, multilevel architectures and polymeric stencils by partial curing and dewetting method | - |
| dc.title.alternative | 부분경화와 비젖음 방법을 통한 다차원, 다층 구조물과 고분자 스텐실 | - |
| dc.type | Thesis | - |
| dc.contributor.AlternativeAuthor | 조혜성 | - |
| dc.description.degree | Doctor | - |
| dc.citation.pages | xiii, 85 | - |
| dc.contributor.affiliation | 공과대학 기계항공공학부 | - |
| dc.date.awarded | 2012-08 | - |
- Appears in Collections:
- Files in This Item:
Item View & Download Count
Items in S-Space are protected by copyright, with all rights reserved, unless otherwise indicated.