서울대학교 중앙도서관
S-Space 소개
My S-Space
로그인이 필요합니다.
Login

S-Space

Publications

Detailed Information

The Effect of Nitrogen and Sulfur Dopants on the Visible Light Photocatalytic Activity of TiO2

DC Field Value Language
dc.contributor.advisor곽승엽-
dc.contributor.author정준호-
dc.date.accessioned2017-07-14T03:07:21Z-
dc.date.available2017-07-14T03:07:21Z-
dc.date.issued2014-02-
dc.identifier.other000000017941-
dc.identifier.urihttps://hdl.handle.net/10371/123287-
dc.description학위논문 (석사)-- 서울대학교 대학원 : 재료공학부, 2014. 2. 곽승엽.-
dc.description.abstractThe effects of nitrogen and sulfur dopants at inside and surface of TiO2 was discussed separately to investigate the reasons for the high visible light photocatalytic activity of nitrogen and sulfur codoped TiO2 (NST). Crystallization and formation of anatase phase of NSTs were observed by X-ray diffraction spectra and high resolution-transmittance electron microscopy (HR-TEM). X-ray photoelectron spectroscopy (XPS) analysis revealed that nitrogen and sulfur atoms are doped at oxygen site of inside of TiO2 while nitrogen is located in substitutional site and sulfur shows shifted sulfide peak on the surface of TiO2. The quantity of dopants at oxygen site is significantly decreased with crystallization of NST at high temperature (> 350 C). As the thermal treatment progressed, sulfur dopants at oxygen site move to surface of NST and finally form sulfate bonding while total amount of sulfur dopants of NST is maintained. UV-Vis diffuse reflectance spectroscopy (DRS) showed that both dopants on the surface and inside of TiO2 reduce band gap energy. The photocatalytic activities of NST were evaluated by the degradation of rhodamine B (RhB) under visible light and UV light irradiation. Results showed that both of dopants in inside of TiO2 and surface of TiO2 enhance visible light photocatalytic activity and act as recombination centers simultaneously. When visible light is irradiated, nitrogen dopants at oxygen site in inside of the TiO2 enhance solution bulk reaction because they reduce band gap energy. Sulfide on the surface of NST enhances the surface reaction by interacting with organic dyes. As-synthesized NST has 7.7 times faster degradation rate than that of P25 under visible light irradiation.-
dc.description.tableofcontentsCONTENTS

ABSTRACT...............................................................................................................i
CONTENTS....................................................................................................................iv
1. Introduction .................................................................................................................1
2. Experimental .............................................................................................................14
2.1. Materials ……..…………………………………………………………….……..14
2.2. Preparation of nitrogen and sulfur codoped TiO2 (NST) .......................................14
2.2.1 Step 1: Synthesis of nitrogen and sulfur codoped TiO2 (NST-As) by solvothermal treatment ………………………………….………............................15
2.2.2. Step 2: Post thermal treatment process ........................................................15
2.3. Characterization of synthesized NSTs …………………………….……………19
2.3.1. Crystal structure crystal size and surface area …………………...……………19
2.3.2. Quantity and chemical state of dopants .............................................................20
2.3.3. Thermal behaviors …………………….............................................................20
2.3.4. Band gap energy measurement ..........................................................................21
2.4. Photocatalytic activity and adsorptivity evaluation ......…………………………..22
2.4.1. Rhodamine B degradation test under visible light irradiation ……….............22
2.4.2. Rhodamine B degradation test under UV light irradiation ………....................23
2.4.3. Adsorption test in rhodamine B and methylene blue solution ……………….23
3. Results and Discussion ................................................................................28
3.1. Characterization of synthesized NSTs ……………………………………….….....28
3.1.1. Crystal structure crystal size and surface area ………………………………28
3.1.2. Quantity and chemical state of dopants .............................................................36
3.1.3. Thermal behaviors ………………….................................................................42
3.1.4. Band gap energy …………................................................................................44
3.2. Photocatalytic activity and adsorptivity ………..…………………..……….……....47
3.2.1. Mechanisms of degradation of rhodamine B by pure TiO2 …...........................47
3.2.1. Visible light photocatalytic activity of NSTs ………………..........................49
3.2.2. UV light photocatalytic activity of NSTs ………………………..……………56
3.2.4. Adsorptivity of NSTs in methylene blue solution ………………………….....59
3.2.5. Mechanisms of degradation of rhodamine B by NSTs ……………………….62
4. Conclusions ………….………………………………………………………….......64
5. References ….............................................................................................................66
KOREAN ABSTRACT ……………………………………...……………………….70
ACKNOWLEDGEMENT……………………………………………………………72		-
dc.formatapplication/pdf-
dc.format.extent1719995 bytes-
dc.format.mediumapplication/pdf-
dc.language.isoen-
dc.publisher서울대학교 대학원-
dc.subjectN-
dc.subjectS codoped TiO2-
dc.subjectphotocatalyst-
dc.subjectphotocatalytic activity-
dc.subjectvisible light-
dc.subjectdopant-
dc.subject.ddc620-
dc.titleThe Effect of Nitrogen and Sulfur Dopants on the Visible Light Photocatalytic Activity of TiO2-
dc.typeThesis-
dc.description.degreeMaster-
dc.citation.pagesv, 72-
dc.contributor.affiliation공과대학 재료공학부-
dc.date.awarded2014-02-
Appears in Collections:
Files in This Item:

Altmetrics

Item View & Download Count

Show Simple Item Record
Find it @ SNU

  • mendeley

Items in S-Space are protected by copyright, with all rights reserved, unless otherwise indicated.

Share

qrcode
SNS Share