Browse

Study on ventilation rate estimation of mechanically ventilated broiler house
강제환기식 육계사의 환기량 산정 방안 연구

DC Field Value Language
dc.contributor.advisor이인복-
dc.contributor.author박관용-
dc.date.accessioned2018-05-29T03:57:57Z-
dc.date.available2018-05-29T03:57:57Z-
dc.date.issued2018-02-
dc.identifier.other000000150627-
dc.identifier.urihttps://hdl.handle.net/10371/141804-
dc.description학위논문 (석사)-- 서울대학교 대학원 : 농업생명과학대학 생태조경·지역시스템공학부, 2018. 2. 이인복.-
dc.description.abstractThe percentage share of the livestock industry output value of Korean agriculture has been steadily increasing since the 1990s. Among them, the chicken production has been increasing as consumption per capita. Broiler houses had been increased their scale and breeding density in order to meet the chicken consumption. However, dense breeding density causes accumulation of heat, moisture, and contaminants inside the broiler house. The improper environment in broiler house leads to a decline in productivity. Various problems can occur because of the failure of environmental control, such as dehydration due to the high temperature and low humidity, and proliferation of pathogenic microorganisms due to excessive humidity, and weakening of broiler's immunity due to the accumulation of pollutants.
Mechanically ventilation system and automatic control system were being introduced into broiler houses, to improve production efficiency through precise environmental control. Mechanically ventilated broiler house has an advantage in terms of controlling ventilation, which is the main environmental control mechanism in livestock houses. Heat, moisture, and pollutants generated inside the broiler house are discharged through ventilation. In order to discharge appropriate amount of substance, accurate evaluation of the ventilation rate is required. The ventilation control in mechanically ventilated broiler house is based on maximum airflow of exhaust fans currently. However, the actual airflow of the fan is reduced as the inlet area of facility decreases and thus static pressure difference between inside and outside of the facility increases. In consideration of this phenomena, evaluating method of ventilation rate was proposed using a fan performance curve, which is the ventilation characteristic of the exhaust fan and orifice equation, ventilation characteristic of the inlet. The in-situ fan performance curve and the discharge coefficient, which is the coefficient of orifice equation have to be evaluated in order to estimate the exact amount of ventilation rate in the broiler house.
In this study, ventilation rate was evaluated according to the operating conditions of the ventilating facility, in two mechanically ventilated broiler houses. Reduction of ventilation rate to set value was measured in the Ire broiler farm located in Buyeo, Chungcheongnam-do. The airflow of sidewall fans was measured according to the operating fans, under slot opening condition of winter. As a result, average airflow through target sidewall fan decreased as the number of operating fans increase. Measured ventilation rate when all three sidewall fans were operated was 77.0% of the set ventilation rate. The slot opening, inlet of target broiler house was 25% open during the experiment. It was analyzed that the static pressure difference due to the narrow slot opening area reduced ventilation rate by acting as a load on the exhaust fans.
Experiment for evaluating ventilation characteristic was conducted in mechanically ventilated broiler house located in Gimje, Jeollabuk-do. The ventilation rate of tunnel fan and the static pressure difference between inside and outside of target broiler house were measured according to the ventilation operating condition, a number of operating fans and slot opening area. Computational fluid dynamics model of target broiler house was designed to overcome the limitation of the field experiment. As a result of regression analysis of the airflow for model validation, a significant difference between measured and simulated airflow was not observed (p-value = 0.239).
The measured ventilation rate and static pressure difference were analyzed to calculate the ventilation characteristic of target broiler house: in-situ fan performance curve and the discharge coefficient. The static pressure difference of in-situ fan performance curve was average 33.7 Pa low than design fan performance curve provided by the manufacturer. Computational fluid dynamics results showed low static pressure difference of in-situ fan performance curve was due to the distribution of static pressure. The static pressure difference between inlet and outlet of exhaust fans was relatively high according to the design fan performance curve. On the other hand, in most of the remaining space including the measurement position of the experiment, constant and low static pressure difference was formed. Computational fluid dynamics models of broiler houses with different lengths were additionally designed. A significant difference between simulated fan performance curve by broiler house length was not calculated (p-value = 0.189). Therefore, the in-situ fan performance curve was analyzed to be a unique characteristic of the target exhaust fan. The discharge coefficients were calculated 0.344 to 0.743 according to the slot opening area. The measured discharge coefficients were 5.29%–114.3% of widely used discharge coefficient of the vent (0.65). For the general application of the discharge coefficient, regression analysis was conducted. The linear relationship between the discharge coefficient and slot opening area was derived (R² = 0.851). Ventilation rate formula was derived from in-situ fan performance curve and orifice equation. It is expected that the ventilation rate can be calculated by a number of operating fans and slot opening area through the estimation formula proposed in this study, instead of field measurement using expensive equipment.
-
dc.description.tableofcontentsChapter 1. Introduction 1
Chapter 2. Literature Review 4
2.1. Evaluating method for ventilation rate of livestock houses 4
2.2. Evaluation of ventilation rate according to static pressure difference 6
Chapter 3. Materials and Methods 9
3.1. Experimental broiler house 9
3.1.1. Ire broiler farm 9
3.1.2. Daeseon broiler farm 12
3.2. Fan performance curve 14
3.2. Orifice equation 16
3.3. Experimental instruments 18
3.4. Computational Fluid Dynamics (CFD) 19
3.5. Research method 20
3.5.1. Measurement of ventilation rate of Ire broiler house in winter condition 20
3.5.2. Measurement of ventilation characteristics in Daeseon broiler farm 21
3.5.3. Ventilation rate formula according to operating condition 26
3.5.4. CFD model design and validation 27
Chapter 4. Results and Discussion 31
4.1. Ventilation rate measurement in Ire broiler farm 31
4.2. Airflow measurement in Daeseon broiler farm 32
4.2.1. Measurement of environmental factors and ventilation characteristic 32
4.2.2. Evaluation of in-situ fan performance curve 34
4.2.3. Airflow decrease by windbreak 37
4.2.4. Evaluation of discharge coefficient of slot opening 39
4.3. Validation of CFD simulation model 43
4.4. CFD simulation result 48
4.4.1. Static pressure distribution 48
4.4.2. In-situ fan performance curve according to length of broiler house 51
4.5. Ventilation rate formula according to the operating condition 52
Chapter 5. Conclusion 57
-
dc.formatapplication/pdf-
dc.format.extent3274875 bytes-
dc.format.mediumapplication/pdf-
dc.language.isoen-
dc.publisher서울대학교 대학원-
dc.subjectComputational fluid dynamics-
dc.subjectDischarge coefficient-
dc.subjectFan performance curve-
dc.subjectMechanical ventilation-
dc.subjectBroiler house-
dc.subjectOrifice equation-
dc.subject.ddc712-
dc.titleStudy on ventilation rate estimation of mechanically ventilated broiler house-
dc.title.alternative강제환기식 육계사의 환기량 산정 방안 연구-
dc.typeThesis-
dc.contributor.AlternativeAuthorGwanyong Park-
dc.description.degreeMaster-
dc.contributor.affiliation농업생명과학대학 생태조경·지역시스템공학부-
dc.date.awarded2018-02-
Appears in Collections:
College of Agriculture and Life Sciences (농업생명과학대학)Dept. of Landscape Architecture and Rural System Engineering (생태조경·지역시스템공학부)Theses (Master's Degree_생태조경·지역시스템공학부)
Files in This Item:
  • mendeley

Items in S-Space are protected by copyright, with all rights reserved, unless otherwise indicated.

Browse