Competing Controls of Effective Stress Variation and Chloritization on Friction and Stability of Faults in Granite: Implications for Seismicity Triggered by Fluid Injection

Abstract

Fluids injection for hydraulic stimulation and fracturing, typical in the development of enhanced geothermal systems (EGS) in granites, can reactivate deep faults and induce seismicity. Such faults typically contain chlorite coatings as an alteration product that may impact styles of deformation-aseismic through seismic. We performed low velocity shear experiments on simulated granite fault gouges under conditions typifying a geothermal reservoir at similar to 4-km depth with a confining pressure of 110 MPa, a temperature of 150 degrees C, fluid pressures of 21-80 MPa, and chlorite contents of 0-100%, to investigate the influence of variation in effective stress and mineral composition on fault strength and stability. Our results show a transition from velocity-strengthening to velocity-weakening behavior in simulated granite gouge when the effective confining pressure was reduced from 89 to 30 MPa, characterized by a transition from fault compaction to dilation-as revealed by microstructural observations-with implications in enabling unstable failure. Conversely, increasing chlorite content stabilizes slip but reduces frictional strength. The microstructures of these mixed gouges exhibit shear localized on chlorite-enriched planes and promoting fault sliding. These results suggest that earthquake ruptures occurring during fluid injection can be facilitated by effective stress variations and that both controlling fluid overpressures (effective stresses) and being aware of the presence of alteration minerals are both important controls in mitigating such injection-induced seismic risks.