Publications

Detailed Information

Microscopic model for fracture of crystalline Si nanopillars during lithiation

DC Field Value Language
dc.contributor.authorRyu, Ill-
dc.contributor.authorLee, Seok Woo-
dc.contributor.authorGao, Huajian-
dc.contributor.authorCui, Yi-
dc.contributor.authorNix, William D.-
dc.date.accessioned2024-05-09T02:26:40Z-
dc.date.available2024-05-09T02:26:40Z-
dc.date.created2024-05-09-
dc.date.issued2014-06-
dc.identifier.citationJOURNAL OF POWER SOURCES, Vol.255, pp.274-282-
dc.identifier.issn0378-7753-
dc.identifier.urihttps://hdl.handle.net/10371/201270-
dc.description.abstractSilicon (Si) nanostructures are attractive candidates for electrodes for Li-ion batteries because they provide both large specific charging capacity and less constraint on the volume changes that occur during Li charging. Recent experiments show that crystalline Si anodes expand highly anisotropically through the motion of a sharp phase boundary between the crystalline Si core and the lithiated amorphous Si shell. Here, we present a microscopic model to describe the size-dependent fracture of crystalline Si nanopillars (NPs) during lithiation. We derive a traction-separation law based on the plastic growth of voids, which, in turn, is used in a cohesive zone-finite element model. The model allows for both the initiation of cracking and crack growth. The initial size and spacing of the nanovoids, assumed to be responsible for the fracture, together with the computed facture toughness, are chosen to conform to recent experiments which showed the critical diameter of Si NPs to be 300-400 nm. The anisotropy of the expansion is taken into account and that leads naturally to the observed anisotropy of fracture. The computed work of fracture shows good agreement with recent experimental results and it may be possible to use it to describe the failure for other loading and geometries. (C) 2014 Elsevier B.V. All rights reserved.-
dc.language영어-
dc.publisherELSEVIER SCIENCE BV-
dc.titleMicroscopic model for fracture of crystalline Si nanopillars during lithiation-
dc.typeArticle-
dc.identifier.doi10.1016/j.jpowsour.2013.12.137-
dc.citation.journaltitleJOURNAL OF POWER SOURCES-
dc.identifier.wosid000332436400036-
dc.identifier.scopusid2-s2.0-84893156503-
dc.citation.endpage282-
dc.citation.startpage274-
dc.citation.volume255-
dc.description.isOpenAccessN-
dc.contributor.affiliatedAuthorRyu, Ill-
dc.type.docTypeArticle-
dc.description.journalClass1-
dc.subject.keywordPlusLITHIUM-ION BATTERIES-
dc.subject.keywordPlusLONG CYCLE LIFE-
dc.subject.keywordPlusSILICON NANOWIRES-
dc.subject.keywordPlusELECTROCHEMICAL LITHIATION-
dc.subject.keywordPlusINITIAL LITHIATION-
dc.subject.keywordPlusDEPENDENT FRACTURE-
dc.subject.keywordPlusANODES-
dc.subject.keywordPlusELECTRODES-
dc.subject.keywordPlusEVOLUTION-
dc.subject.keywordPlusENERGY-
dc.subject.keywordAuthorLithiation/delithiation-
dc.subject.keywordAuthorLarge deformation-
dc.subject.keywordAuthorStrain energy release rate-
dc.subject.keywordAuthorCritical size-
Appears in Collections:
Files in This Item:
There are no files associated with this item.

Related Researcher

Ryu, Ill Image

Ryu, Ill류일
조교수
  • College of Engineering
  • Department of Materials Science & Engineering
Research Area Fundamental deformation mechanisms, Optimal desing in nanostructures, Reliability Analysis in Nanostructures

Altmetrics

Item View & Download Count

  • mendeley

Items in S-Space are protected by copyright, with all rights reserved, unless otherwise indicated.

Share