Publications

Detailed Information

Development of high strength hot rolled low carbon copper-bearing steel containing nanometer sized carbides

DC Field Value Language
dc.contributor.authorPhaniraj, M. P.-
dc.contributor.authorShin, Young-Min-
dc.contributor.authorLee, Joonho-
dc.contributor.authorGoo, Nam Hoon-
dc.contributor.authorKim, Dong-Ik-
dc.contributor.authorSuh, Jin-Yoo-
dc.contributor.authorJung, Woo-Sang-
dc.contributor.authorShim, Jae-Hyeok-
dc.contributor.authorChoi, In Suk-
dc.date.accessioned2024-05-14T07:07:42Z-
dc.date.available2024-05-14T07:07:42Z-
dc.date.created2023-07-14-
dc.date.created2023-07-14-
dc.date.issued2015-05-
dc.identifier.citationMaterials Science and Engineering: A, Vol.633, pp.1-8-
dc.identifier.issn0921-5093-
dc.identifier.urihttps://hdl.handle.net/10371/201965-
dc.description.abstractA low carbon ferritic steel was alloyed with Ti, Mo and Cu with the intention of achieving greater increment in strength by multiple precipitate strengthening. The steel is hot rolled and subjected to interrupted cooling to enable precipitation of Ti-Mo carbides and copper. Thermodynamic calculations were carried out to determine equilibrium phase fractions at different temperatures. Microstructure characterization using transmission electron microscopy and composition analysis revealed that the steel contains similar to 5 nm size precipitates of (Ti,Mo)C. Precipitation kinetics calculations using MatCalc software showed that mainly body centered cubic copper precipitates of size < 5nm form under the cooling conditions in the present study. The steel has the high tensile strength of 853 MPa and good ductility. The yield strength increases by 420 MPa, which is more than that achieved in hot rolled low carbon ferritic steels with only copper precipitates or only carbide precipitates. The precipitation and strengthening contribution of copper and (Ti,Mo)C precipitates and their effect on the work hardening behavior is discussed. (C) 2015 Elsevier B.V. All rights reserved.-
dc.language영어-
dc.publisherElsevier BV-
dc.titleDevelopment of high strength hot rolled low carbon copper-bearing steel containing nanometer sized carbides-
dc.typeArticle-
dc.identifier.doi10.1016/j.msea.2015.02.067-
dc.citation.journaltitleMaterials Science and Engineering: A-
dc.identifier.wosid000353845200001-
dc.identifier.scopusid2-s2.0-84924985596-
dc.citation.endpage8-
dc.citation.startpage1-
dc.citation.volume633-
dc.description.isOpenAccessN-
dc.contributor.affiliatedAuthorChoi, In Suk-
dc.type.docTypeArticle-
dc.description.journalClass1-
dc.subject.keywordPlusPRECIPITATION KINETICS-
dc.subject.keywordPlusMECHANICAL-PROPERTIES-
dc.subject.keywordPlusFE-CU-
dc.subject.keywordPlusEVOLUTION-
dc.subject.keywordPlusBEHAVIOR-
dc.subject.keywordPlusNB-
dc.subject.keywordPlusSIMULATION-
dc.subject.keywordPlusNUCLEATION-
dc.subject.keywordPlusPARTICLES-
dc.subject.keywordPlusGROWTH-
dc.subject.keywordAuthorHSLA steel-
dc.subject.keywordAuthorCopper-
dc.subject.keywordAuthorNano-sized carbides-
dc.subject.keywordAuthorInterrupted cooling-
dc.subject.keywordAuthorNumerical simulation-
Appears in Collections:
Files in This Item:
There are no files associated with this item.

Related Researcher

  • College of Engineering
  • Department of Materials Science & Engineering
Research Area High Temperature Alloys, High Strength , Nano Mechanics and Nano Structure Design for Ultra Strong Materials, Shape and Pattern Design for Engineering Materials

Altmetrics

Item View & Download Count

  • mendeley

Items in S-Space are protected by copyright, with all rights reserved, unless otherwise indicated.

Share