Publications
Detailed Information
Cyclic Loading Test for Reinforced Concrete Frame with Thin Steel Infill Plate
DC Field | Value | Language |
---|---|---|
dc.contributor.author | Choi, In-Rak | - |
dc.contributor.author | Park, Hong-Gun | - |
dc.date.accessioned | 2011-12-08T01:40:56Z | - |
dc.date.available | 2011-12-08T01:40:56Z | - |
dc.date.issued | 2011-06-01 | - |
dc.identifier.citation | JOURNAL OF STRUCTURAL ENGINEERING-ASCE; Vol.137 6; 654-664 | - |
dc.identifier.issn | 0733-9445 | - |
dc.identifier.uri | https://hdl.handle.net/10371/75109 | - |
dc.description.abstract | An experimental study was performed to investigate the cyclic behavior of walls that are composed of reinforced concrete boundary frames and thin steel infill plates. For this purpose, three-story steel plate infilled walls (SPIW) were tested. The parameters in this test were the reinforcement ratio of the columns and opening in the infill plates. A reinforced concrete infilled wall (RCIW) and a reinforced concrete frame (RCF) were also tested for comparison. The deformation capacity of the SPIW specimens was significantly greater than that of the RCIW specimen, though the specimens exhibited an identical load-carrying capacity. Similar to the steel plate walls with steel boundary frames, the SPIW specimens showed excellent strength, deformation capacity, and energy dissipation capacity. Furthermore, by using the steel infill plates, shear cracking and failure of the column-beam joints were prevented. By using the strip model, the strength and initial stiffness of the SPIW specimens were predicted. The prediction results were compared with the test results. DOI: 10.1061/(ASCE)ST.1943-541X.0000317. (C) 2011 American Society of Civil Engineers. | - |
dc.language.iso | en | - |
dc.publisher | ASCE-AMER SOC CIVIL ENGINEERS | - |
dc.subject | Steel plates | - |
dc.subject | Cyclic tests | - |
dc.subject | Frames | - |
dc.subject | Reinforced concrete | - |
dc.subject | Shear walls | - |
dc.title | Cyclic Loading Test for Reinforced Concrete Frame with Thin Steel Infill Plate | - |
dc.type | Article | - |
dc.contributor.AlternativeAuthor | 최인락 | - |
dc.contributor.AlternativeAuthor | 박홍근 | - |
dc.identifier.doi | 10.1061/(ASCE)ST.1943-541X.0000317 | - |
dc.citation.journaltitle | JOURNAL OF STRUCTURAL ENGINEERING-ASCE | - |
dc.description.citedreference | Berman J, 2003, J STRUCT ENG-ASCE, V129, P1448, DOI 10.1061/(ASCE)0733-9445(2003)129:11(1448) | - |
dc.description.citedreference | Lubell AS, 2000, J STRUCT ENG-ASCE, V126, P453 | - |
dc.description.citedreference | *PSI, 1999, PCI DES HDB PREC PRE | - |
dc.description.citedreference | Elgaaly M, 1998, THIN WALL STRUCT, V32, P151 | - |
dc.description.citedreference | MAZZONI S, 2006, OPEN SYSTEM EARTHQUA | - |
dc.description.citedreference | Park HG, 2007, J STRUCT ENG-ASCE, V133, P378, DOI 10.1061/(ASCE)0733-9445(2007)133:3(378) | - |
dc.description.citedreference | *ACI, 2008, 31808 ACI | - |
dc.description.citedreference | Choi IR, 2008, J STRUCT ENG-ASCE, V134, P1495, DOI 10.1061/(ASCE)0733-9445(2008)134:9(1495) | - |
dc.description.citedreference | Choi IR, 2009, J STRUCT ENG-ASCE, V135, P785, DOI 10.1061/(ASCE)0733-9445(2009)135:7(785) | - |
dc.description.citedreference | DRIVER RG, 1998, J STRUCT ENG, V124, P111, DOI DOI 10.1061/(ASCE)0733-9445(1998)124:2(111) | - |
dc.description.citedreference | CACCESE V, 1993, J STRUCT ENG-ASCE, V119, P573 | - |
dc.description.citedreference | BALDELLI JA, 1983, ENG J AISC, V20, P70 | - |
dc.description.citedreference | THORBURN LJ, 1983, 107 U ALB DEP CIV EN | - |
dc.description.citedreference | TIMLER PA, 1983, 114 U ALB DEP CIV EN | - |
dc.description.tc | 0 | - |
dc.identifier.wosid | 000291682700004 | - |
- Appears in Collections:
- Files in This Item:
- There are no files associated with this item.
Item View & Download Count
Items in S-Space are protected by copyright, with all rights reserved, unless otherwise indicated.