Browse

Optimal Trajectory for the Atlantooccipital Transarticular Screw

Cited 0 time in Web of Science Cited 0 time in Scopus
Authors
Lee, Kyoung Min; Yeom, Jin S.; Lee, Joon Oh; Buchowski, Jacob M.; Park, Kun-Woo; Chang, Bong-Soon; Lee, Choon-Ki; Riew, K. Daniel
Issue Date
2010-07
Publisher
LIPPINCOTT WILLIAMS & WILKINS
Citation
SPINE Vol.35 No.16, pp. 1562-1570
Keywords
의약학atlantooccipital jointtransarticular screwentry pointtrajectoryscrew length
Abstract
Study Design. Radiologic evaluation of computed tomography (CT) scans using screw insertion simulation software. Objective. To investigate the optimal entry point and trajectory of atlantooccipital transarticular screws. Summary of Background Data. To our knowledge, no large series focusing on the placement of atlantooccipital transarticular screws have been published. Methods. We used 1.0-mm sliced CT scans and 3-dimensional screw trajectory software to simulate 4.0-mm screw placement. Four entry points were evaluated. Screw placement success rate, safe range of medial angulation, and screw length using each entry point were determined. Results. CT scans of 126 patients were evaluated, for a total of 252 screws for each entry point. On simulation, the 2 lateral entry points showed significantly higher success rates and safe range of medial angulation than the 2 middle points. The 2 lateral entry points had similar success rates (98.0% for anteriolateral (AL) point and 97.6% for posteriolateral (PL) point). Although the safe range of medial angulation was significantly wider for the AL point (26.1 degrees) than for the PL point (23.7 degrees), the screw lengths were significantly longer for the PL point (32.6 mm) than for the AL point (29.4 mm). For both points, 30 degrees of medial angulation led to highest rate of successful screw placement, but the rate was only 79.4% and 80.2%, respectively. Conclusion. Although there was no significant difference in success rates between AL and PL points, PL is likely the best entry point. Although 30 degrees medial and similar to 5 degrees upward angulation led to the highest rate of successful screw placement, the rate was only around 80%. Given the wide individual variation, we recommend that a pre-operative 3-dimensional CT scan be obtained when attempting atlantooccipital transarticular screw fixation.
ISSN
0362-2436
Language
English
URI
https://hdl.handle.net/10371/81639
Files in This Item:
There are no files associated with this item.
Appears in Collections:
College of Medicine/School of Medicine (의과대학/대학원)Orthopedic Surgery (정형외과학전공)Journal Papers (저널논문_정형외과학전공)
  • mendeley

Items in S-Space are protected by copyright, with all rights reserved, unless otherwise indicated.

Browse